Super Elastic Coil Tool Lanyard With Two Spring Buckles With Nut
stainless steel, galvanized steel,etc.
500pcs Spring Coil Tool Lanyard
|5.length||1M-3M or as requirement|
|6.type||Anti-fatigue plastic coated elastic lanyard|
8.end parts of fittings
a large selection of end fittings,including eye bolts,links,springs,hooks,thimble,clips,stops,ball ,ball shanks ,sleeve ,stamped eye,handles,etc
7days if there were enough material in stock
Free sample Spring Coil Tool Lanyard available if all of dimensions same as our existing one ,if not ,contact me ,to get a cost efficient solution.
WARNING :Breaking strength should never be considered the rope's working load ,safety factor 5:1 ,Coating must be removed from installation area when attaching fittings
Refer to the drawing as below:
All of specification custom-made available. the tighter tolerance ,the higher the cost of the cost.
Introduction of automatic machines
Before our engineers built this automatic machine, we have to set one man to thread the crimp, one man to position the crimp in the correct place, and one man to operate the hydraulic machine to finish the swaging process.But now, only need one man to feed the machine, and it is done.The purpose of building such machines is not only to save the manpower. The outcome between a skilled worker and an apprentice has a great difference in manual processing. Not only the quantity, also the quality. It becomes a barrier in the way of quality improvement. But the products produced by automatic machines have the advantage of the exact same measurements and the stable output.
In the future, Guofeng is going to build more of these machines to enhance our capacity in providing industrial solutions for you.
1. How do you design a wire cable assembly?
Of course, we have to know your application firstly and a number of factors have to be considered, such as workload, safety abrasion, environment, cycle life, flexibility, cost, When we design the steel wire cable assembly.
2. What’s the safety factor of your product?
General, use a 5 to 1 or 3 to 1 safety factor when we design it, example: breaking load is (1000N) 100kg, the safety factor is 5:1 (200N) Breaking strength should never be considered the rope's working load
3. What’s the lead time of my order?
It largely depended on the size of your order .normally, 15days. if you are in urgent need of it, we will try my best to meet your requirements.
4. How to place an order?
We produce according to customers’ specifications, so you’d better give us complete information as specified below:
5. Are there different types of materials and qualities of the product or is it just one type?
Many types of quality are available. We are a factory manufacturer in Dongguang City, China, we offer OEM and ODM service. So you can choose from our design, or we make a new product as you requested.
If you have any questions else, please feel free to contact us.